With the development of industrial automation, this market is getting bigger and bigger. Of course, Yuan xing company is also more and more experienced in manufacturing woodworking machinery hydraulic cylinder .
Woodworking machinery hydraulic oil cylinder is widely used in all kinds of woodworking machinery, including wood wood sawing machine, planing machine, woodworking machine, woodworking milling machine, carpenter drilling machine, carpenter drilling machine, woodworking sander, sawdust, woodworking planer, splitting machine, etc.
If you are interested in our woodworking machinery oil cylinder, welcome to contact us and we will reply to you as soon as possible.
We can design according to user requirements, manufacturing various types of standards, non-standard hydraulic cylinders,
Hydraulic Cylinder: HSG-01 Engineering Cylinder, Y-HG1 (YG) Metallurgical Cylinder, CD250 CD350 CG250 CG350 Heavy Metallurgical Cylinder, DG Vehicle Cylinder, Heavy Duty Hydraulic Cylinder, Plunger Cylinder, Woodworking Machinery Hydraulic Cylinder, Corrosion Resistant Hydraulic Cylinder and special non-standard large diameter, long stroke hydraulic cylinder
Piston hydraulic cylinder can be divided into single-rod and double-rod two structures, the fixed way by the cylinder fixed and fixed piston rod two, according to the role of hydraulic pressure has a single role and double-acting. In a single role In the hydraulic cylinder, the pressure oil is only provided in a cavity of the hydraulic cylinder, which realizes unidirectional movement of the cylinder by hydraulic pressure and external force (such as spring force, self-weight or external load) in the opposite direction; and the double-acting hydraulic cylinder piston movement in both directions alternately into the two chambers through the oil, the role of hydraulic pressure to complete, it is only one side of the piston with a piston rod, so the effective area of the two chambers are different. In the oil the same amount, the different chamber into the oil, the piston speed of movement is different; in the same load force to be overcome, the different chamber into the oil, the required oil pressure is different, or set in the system pressure, sanitation Garbage truck hydraulic cylinder movement in both directions can overcome the load force is different.
1. Raw materials entering the factory, 27SiMn, 40CrMo, ST52, 45# steel tubes or bars for choice
2. Do the pre-treatment including pickling, phosphating and saponification, and then cold-draw the seamless steel tubes.
3. Put the steel tubes into the tempering furnace to do the stress relief annealing in convenience of the subsequent the processing.
4. Multi-roll straightening machine, with 10 straightening points, achieves the automatic rolling straight improving the efficiency greatly
5. Heat treatment to obtain work pieces with different properties by changing their internal microstructure or surface chemical composition.
6. Cylindrical degree can be controlled within 0.03mm and the surface roughness is up to 0.4 by honing with range:φ40mm-φ450mm and longest length: 12000mm
7. Machining processes to obtain high precision parts with complex shapes strictly according to the detailed drawings.
8. Electroplating production process fulfills the functional and ornamental requirements for coating work pieces of different dimensions according to specific application requirements.
9. Cleaning all the parts by automatic cleaning machine in the special solution and under special temperature control effectively.
10. All the parts are assembled into complete cylinders according to the strict assembly instructions by skillful workers in dust-free workshop.
11. Do proof pressure and performance tests to check whether the cylinders can operate smoothly and stably under the specified pressure with no leakage and deformation.
12. Do the painting including high quality primer and topcoat to obtain beautiful appearance and protect the cylinders against the anticorrosion.
13. Wooden pallet or boxes packing with plastic films wrapped on the surface, suitable for long-time sea transport.
Eliminates hoses and tubing from the manifold block
Reduces the use and cost of additional purchased parts
Streamlines for a better fit, a better aesthetic appearance, and increased clearances on the equipment
Prevents contamination during machine assembly
(mm) Bore Diameter
(mm) Rod Diamter
(mm) Push(KN) Pull(KN)
HSGK01-160/90E-131 715 160 90 321.7 219.9
HSGL01-100/60E-131 1200 100 60 125.66 87.65
HSGK01-80/50E-131 700 80 50 101.79 70.37
HSGK01-80/50E-131 640 80 50 101.79 70.37
HSGK01-80/50/E-131 550 80 50 101.79 70.73
HSGL01-80/50-131 500 80 50 80.43 54.98
HSGL01-80/50E-131 440 80 50 80.43 43.41
HSGL01-63/35E-131 200 63 35 50 34.5
HSGL01-63/35E-131 300 63 35 50 34.5
HSGL01-50/28E-131 140 50 28 31.42 21.56
Scope of application:
Utilities, material handling, oil and natural gas, national defense, transportation, agriculture, industry, forestry, construction industry, etc.
Quality certificate and production equipment：
Through our company's continuous efforts, strict requirements for product quality. The hydraulic cylinder produced by our company has passed the ISO9000, ISO9001 certification and the highest quality requirements.stipulated by our strict quality control system.
Our company is able to make production according to the standard and quantity required by the customer, and can guarantee the hydraulic cylinder product that the customer needs in the time limit, because we have advanced production equipment.
Such as: CNC lathe, processing center, SYT hydraulic cylinder test platform, hydraulic oil cylinder spraying equipment, hydraulic cylinder welding machine, ultrasonic cleaning equipment, quality inspection line.
Minimum order quantity: 5 pieces/piece
Supply capacity: 20,000 pieces per month
Port: Qingdao, China
Terms of payment: l/c, t/t
Standard or non-standard: non-standard
Structure: piston hydraulic cylinder plunger hydraulic cylinder
Product materials: steel
Maximum stroke: 15,000mm
Shaft diameter: 10-500mm
Origin: shandong, China (mainland)
Model: hydraulic cylinder
Brand name: yuanxing
Color: yellow, orange, blue, red, black, etc.
Packing details: packing film + plywood box or according to customer requirements.
Delivery details: 25-40 days
Packaging and transportation:
1. Packaging: steel tray, plywood box, or according to customer requirements.
2. Shipping: shipping, air or express company.
In addition to the sales of our existing hydraulic cylinder products, our company can also produce hydraulic cylinder products according to customers' drawings or samples. In the production process, we strictly control the product quality to ensure each hydraulic cylinder product quality qualified. We provide the most advanced technical support and high quality after-sales service, hoping to establish long-term cooperation with customers.
Forestry Machinery Hydraulic Cylinder factory